FAQ

Tips and Frequently Asked Questions

FAq

Mono 3-in-1 

How to Use?
  • disinfect the hands
  • to shape the nails use a file 100/180 grid.
  • wash the nails and clean it with Nail Cleaner and wait for it to evaporates.  We apply MONO 3IN1 UV LACK varnish on a natural tile
  • a thin layer (if too thick a layer is applied, the product gently wrinkles)
  • cure in LED lamps according to the table
  • we apply a second coat of varnish and cure in the lamp
How to Remove?

To remove varnish from nails, polish the shiny layer with a polishing block , then apply Acetone .
* for this purpose, apply acetone on Foil Nail Wraps (or use a dust-free swab and cover the nail with it , then wrap it with aluminum foil and leave for about 5 minutes. If paint residues remain, remove them with a wooden stick or metal hoof . If necessary, remove residues with a manicure brush .

Important Health Information

For professional use. Keep away from children. In case of contact with eyes, rinse eyes for 15 minutes. plenty of water. Immediately contact an ophthalmologist. In case of skin contact, wash the skin with soap and water and rinse with plenty of water.

FAQ

UV Gel Polish

Advantages of UV Gel Polish
  • STAY UP TO 3 WEEKS
  • NO SPLITTING
  • SCRATCH – RESISTANT
  • HIGH-GLOSS FINISH
  • HARDNESS IN SECONDS
  • HIGH COVER FOR THE FIRST LAYER
  • STABILIZES NATURAL NAILS

* NOTE: The colours in the pictures may differ from the actual ones due to the individual settings of the monitor.

Application Steps

Always shake well before use.

STEP 1. Give the nails the desired shape. Carefully push the nail skin back with a wooden stick or nail pusher. Then file the nail surface with the NEONAIL BUFFER and remove any dust formed with a brush.

STEP 2. Degrease the nails with the NeoNail NAIL CLEANER.

STEP 3. Add the UV HARD BASE coat as a primer and allow it to cure under LED LAMP or UV LAMP light. (Do not wipe the nails with the cleaner afterwards).

STEP 4. Apply the UV NAIL GEL POLISH in the colour of your choice and allow it to cure under LED or UV light. Do not wipe the nails afterwards. Repeat the process.

STEP 5. Apply the UV HARD TOP to give a very clear shine effect and allow it to cure under LED or UV light.

Then clean your nails with the NAIL CLEANER.

STEP 6. For extra care, use a nail oil.

Removal Steps

STEP 1.  To remove the nail polish from the nails, roughen the glossy layer of nail polish with a NAIL FILE.

STEP 2. Soak a NAIL WRAPS with UV NAIL POLISH REMOVER or ACETONE, wrap tightly around the finger and allow to work for about ten minutes.

STEP 3. Remove the UV nail polish with a WOODEN STICK or a metal nail pusher.

Ingredients

Polyurethane acrylates Oligomer, Hema, Hydroxycyclohexyl Phenyl ketones, bis-trimethylbenzoyl Phenylphosphine oxides, +/- Polyethylene terephthalates, CI 15850, CI 77499, CI 77742, CI 77891, CI 15985, CI 77492, CI 77289, CI 77510, CI 17200, CI 7749th

Safety Measures

UV Nail Gel Polishes from NeoNail are only suitable for professional use. Keep the product away from children. Avoid contact with eyes and skin. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice immediately. The product can cause allergies or irritation. Do not use if allergic or hypersensitive to any component of the product. If the nail surface is damaged or irritated, the UV nail polish should not be used. If irritation or hypersensitivity occurs, the application should be interrupted immediately. Do not use product after expiry date. Do not expose the UV nail polish to direct UV radiation.

Use the product for its intended purpose only.

UV nail polish is intended as a product for professional use. The NeoNail gel polish, can only be carried out by trained and qualified persons.

The product should not be used until the age of 16.

FAQ

Base Coats

Application Steps

Always shake well before use.

STEP 1. Give the nails the desired shape. Carefully push the nail skin back with a wooden stick or nail pusher. Then file the nail surface with the NEONAIL BUFFER and remove any dust formed with a brush.

STEP 2. Degrease the nails with the NeoNail NAIL CLEANER.

STEP 3. Add the UV BASE coat as a primer and allow it to cure under LED LAMP or UV LAMP light. (Do not wipe the nails with the cleaner afterwards).

STEP 4. Apply the UV NAIL GEL POLISH in the colour of your choice and allow it to cure under LED or UV light. Do not wipe the nails afterwards. Repeat the process. 

STEP 5. Apply the UV TOP coat to give a very clear shine effect/matte and allow it to cure under LED or UV light.

Wipe nails with Nail Cleaner (some Top Coats are non wipe)

STEP 6. For extra care, use a nail oil.

Silk Protein Base 6 in1: Application

Base 6in1 Silk Protein version without the application of colored uv gel polish

  1. Gently polish the nail with a polisher, remove the dust, then rinse with a cleaner.
  2. Apply the primer on the prepared nail plate *, and then apply a thin layer of Base 6in1 Silk Protein, cure in an LED or UV lamp according to the curing time table.
  3. Apply a second, slightly thicker base layer on the natural nail and on the template (if you decide to extend it). Cure everything in an LED or UV lamp according to the curing time table.
  4. If necessary, after hardening the nails should be leveled with a 180 degree file. Remove any dust created with a brush, then rinse with Cleaner.
  5. Finally apply a thin layer of Base 6in1 Silk Protein, cure again. After curing, rinse with a sticky cleaner. **

* We recommend using a primer dedicated to your nail plate.

** The product is very shiny on the nail plate / DOES NOT NEED to use Top.

Silk Protein Base 6 in1 version with the application of colored uv gel polish

  1. Gently polish the nail with a polisher, remove the dust, then rinse with a cleaner.
  2. Apply the primer on the prepared nail plate * and then apply a thin layer of Base 6in1 Silk Protein, cure in LED or UV lamp according to the curing time table.
  3. Apply a second, slightly thicker layer on the natural nail and on the template (if you decide to extend it). Cure everything in an LED or UV lamp according to the curing time table.
  4. If necessary, after hardening, the nails should be leveled with a 180 degree file. Remove any dust formed, then rinse with Cleaner.
  5. Apply a layer of uv gel polish in the selected color and cure in an LED or UV lamp according to the curing time table. The darker the color, the longer the cure time.

To get the color depth repeat the procedure.

  1. Finally, apply a thin layer of TOP depending on the style chosen. Top should be cured in an LED or UV lamp according to the curing time table.

 

* We recommend using a primer dedicated to your nail plate.

Removal Steps

STEP 1.  To remove the nail polish from the nails, roughen the glossy layer of nail polish with a NAIL FILE.

STEP 2. Soak a NAIL WRAPS with UV NAIL POLISH REMOVER or ACETONE, wrap tightly around the finger and allow to work for about ten minutes.

STEP 3. Remove the UV nail polish with a WOODEN STICK or a metal nail pusher.

Ingredients

Polyurethane acrylates Oligomer, Hema, Hydroxycyclohexyl Phenyl ketones, bis-trimethylbenzoyl Phenylphosphine oxides, +/- Polyethylene terephthalates, CI 15850, CI 77499, CI 77742, CI 77891, CI 15985, CI 77492, CI 77289, CI 77510, CI 17200, CI 7749th

Safety Measures

UV Nail Gel Polishes from NeoNail are only suitable for professional use. Keep the product away from children. Avoid contact with eyes and skin. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice immediately. The product can cause allergies or irritation. Do not use if allergic or hypersensitive to any component of the product. If the nail surface is damaged or irritated, the UV nail polish should not be used. If irritation or hypersensitivity occurs, the application should be interrupted immediately. Do not use product after expiry date. Do not expose the UV nail polish to direct UV radiation.

Use the product for its intended purpose only.

UV nail polish is intended as a product for professional use. The NeoNail gel polish, can only be carried out by trained and qualified persons.

The product should not be used until the age of 16.

Curing Times

View our curing times pdf

FAQ

UV Gel Top Coat

Information

Our UV Nail Polish Top Coats are a newly developed overcoat that gives your nail design a high gloss/matte finish. The products forms a sealing layer and prevents the penetration of dirt for several weeks.

Application Steps

How to use?

  1. Gently polish the nail with a polisher , remove the dust formed, then rinse with a Cleaner .
  2. Apply a thin layer of BASE and cure in the LED / UV lamp  according to the table.
  3. Apply a layer of hybrid varnish in the selected color and cure in the LED lamp or UV lamp according to the table  (the darker the color, the longer the curing time). Repeat the operation to obtain a depth of color.
  4. Apply a layer of Top Coat to give a strong shine/matt finish.
  5. Cure in a LED lamp or a UV lamp according to the table. After curing wipe / non wipe after with Nail Cleaner…  See below which top coats need to be wiped….
Wipe / Non Wipe Top Coats?

Dry Top – Non Wipe

Top Sunblock – Non Wipe

Top Bright Shine – Wipe with Nail Cleaner

Hard Top – Wipe with Nail Cleaner

Dry Top Matt – Non Wipe

Top Gold / Top Silver / Top Glow

How to use?

1. Gently polish the nail with a polisher , remove the dust formed, then rinse with a cleaner .

2. Apply a thin layer of HARD BASE and cure in the LED / UV lamp according to the table .

3. Apply a layer of hybrid varnish in the selected color and cure in the LED / UV lamp according to the table (the darker the color, the longer the curing time). Repeat the operation to obtain a depth of color.

4. Apply a layer of TOP GLOW GOLD, TOP GLOW SILVER or Top Glow to give a glitter finish to the styling.

5. Cure in the LED / UV lamp according to the table. Top does not have a dispersion layer, so it is not necessary to rinse with Cleaner .

Curing Times

View our curing times pdf

FAq

Powders and Glitters

Moonlight effect

INSTRUCTIONS STEP BY STEP:

1. Prepare the nails.

2. Apply HARD BASE thinly as a baee coat and allow to cure in the LED or UV lamp (according to the table below)

3. Paint the UV Nail Gel Polish Colour of your choice thinly and allow to cure in the LED or UV light curing unit (do not clean the layer). Repeat process.

3. Apply TOP DRY thinly and allow to cure in the LED or UV light curing unit.

4. Apply MOONLIGHT EFFECT immediately and spread around the nail by massaging it in. A pigment applicator is ideally suited for this purpose. Remove the excess powder with a soft brush.

5. Apply TOP DRY again to a thin layer and allow to cure in the LED or UV light curing unit. Repeat process.

6. For the extra care, use cuticle oil.

Chrome Effect

APPLICATION

1. Gently file the nail plate using the NeoNail Buffer.

2. Apply a thin layer of UV HARD BASE and cure in LED or UV lamp according to the table.

3. Apply a layer of UV gel polish in the desired color and cure using the lamp (the darker the color, the longer the curing time). For color depth, repeat the action.

4. Apply DRY TOP to give a very clear gloss finish and cure in the lamp.

5.Carefully apply the powder with your fingertip or applicator. The excess powder can be removed with a soft brush.

6. Apply the UV HARD TOP or DRY TOP and cure in the lamp.

Arielle Effect

Application:

Apply the powder with a brush to the still moist nail polish or on the perspiration layer of the UV lacquer. Next work the powder carefully with your finger so that most of the powder remains on the nails. Then rub the product with a soft brush in circular movements. Finally, add an oversize or UV-Top.

CAUTION: If the UV nail polish only has a thin dispersion layer, allow the overcoat to cure slightly.

Sunset Effect

Application:

APPLICATION

1. Onto cured UV gel polish, apply Dry Top (without sticky layer) and cure using the lamp.

2. Use special applicator or fingertip to rub the powder onto the nail plate in circular motions.

3. Remove excess of the powder with a soft brush and cover the entire nail using Dry Top (to give an amazing gloss), Hard Top or Top Sunblocker, make sure that the free edge of the nail is well protected, cure using the lamp.

Weight: 0.3 g.

Glitter Effect

Application:

Full cover effect:

1. Prepare the nails.

2. Thinly apply the UV undercoat HARD BASE as a primer and let it harden under LED or UV light (do not clean the nails afterwards).

3. Thinly apply the UV NAIL POLISH in the color of your choice and let it cure under LED or UV light. Do not clean the nails afterwards. Repeat the process.

4. Thinly apply HARD TOP and allow it to cure under LED or UV light for a very short time (about 10 seconds). 

5. Apply the Electric Effect using a suitable applicator. Use a soft brush to remove the excess glittering flakes.

6. Apply the UV HARD TOP for sealing.

Subtle effect

1. Prepare the nails.

2. Thinly apply the UV base coat – HARD BASE and let it cure under LED or UV light (do not clean the nails afterwards).

3. Thinly apply the UV NAIL POLISH in the color of your choice and let it cure under LED or UV light. Do not clean the nails afterwards.

4. Thinly apply the 2 coat of UV NAIL POLISH in the color of your choice and let it cure under LED or UV light.

5. Apply the Chrome Flakes Efefctt to the selected areas with the aid of a silicone brush or finger pad on the second (sticky) colour layer.

6. Apply thinly the final coat – HARD TOP for protection.

Weight: 2g

Fluo Effect

APPLICATION

  1. Gently polish the nail with a polishing block.
  2. Apply a thin layer of HARD BASE and cure in  LED or UV lamp according to the table.
  3. Apply a layer of UV Gel polish in the desired colour and cure using the lamp (the darker the colour, the longer the curing time).
  4. Then apply a second, equally thin layer of the same UV Gel Polish and immediately sprinkle it with Fluo Effect pollen and cure using the      lamp.
  5. Remove excess pollen with a soft brush. Then paint the nail with a layer of Dry Top (to achieve an amazing gloss), make sure that the free edge of the nail is well protected and cure using the lamp.
3D Holo Effect
  1. Gently polish the nail with a polishing block .
  2. Apply a thin layer of HARD BASE  and cure in a 48W LED lamp or  36W UV lamp according to the  table .  
  3. Apply a layer of hybrid varnish in the selected color and cure again in the lamp  (the darker the color, the longer the curing time). To get the color depth repeat the procedure.
  4. Then apply a second, equally thin layer of the same varnish, then cure the varnish in the lamp.
  5. Apply a layer of DRY TOP  to give a very expressive gloss, then cure in the lamp.
  6. Rub 3D Holo Effect into the cured top with your fingertip or applicator – a sponge . Remove excess pollen  with a soft brush .
  7. Cover the nails with a layer of Top Sunbloker  and cure in the lamp.
  8. Cover the nails again – this time – Hard Top or Dry Top and cure in the lamp.

Do not use on classic nail polish

Pearl Effect

Application by rubbing:

  1. Prepare the nail plate for styling.
  2. Apply Hard Base and cure in a lamp.
  3. We apply the first layer of hybrid varnish color and cure it in the lamp.
  4. Apply the second layer of hybrid varnish color and harden.
  5. Apply Dry Top and cure for 10 seconds.
  6. Rub Pearl Effect into the entire nail plate using an applicator or a silicone brush . Remove the remains with a dust brush .

We secure everything with Hard Top .